A method to reinforce the steadiness of perovskite photo voltaic cells underneath reverse bias situations – Uplaza

Determine displaying how a perovskite module rapidly degraded underneath reverse bias of -9 V for two hours. Credit score: Nengxu Li et al

If a person photo voltaic cell is shaded and different cells in the identical module usually are not, the sunlit cells can attempt to drive present by the shaded cell, leading to a rise in temperature and potential injury to the cells. These situations put the shadowed cell underneath a situation generally known as reverse bias, which makes photo voltaic cells unstable and deteriorates their efficiency over time.

Researchers at College of North Carolina at Chapel Hill not too long ago launched a brand new technique that might enhance the steadiness of perovskite photo voltaic cells (PSCs) underneath reverse bias situations. This technique, outlined in a paper printed in Nature Power, might facilitate the longer term deployment of perovskite-based photovoltaics (PVs) in real-world settings.

“The reverse bias stability or shading induced instability of solar cells drew the attention of the PV community only recently,” Jinsong Huang, corresponding creator of the paper, instructed Tech Xplore. “The shaded cells are subjected to the large reverse bias imposed by the rest of cells which are not shaded. For PSCs, the reverse bias-induced instability was reported to be much more severe in the past.”

Perovskite cells are recognized to have a considerably thinner photoactive layer than different current PVs. Consequently, the electrical discipline induced by reverse bias situations could be far bigger in one of these cell.

“The notorious ion migration in perovskites also makes them much less stable under reverse bias,” Huang mentioned. “In most prior studies, PSCs were reported to break down or degrade after a few seconds to a few minutes under reverse bias of a few volts. If this problem is not solved, future perovskite modules will need many bypass diodes to protect them, pushing up their fabrication costs.”

When reviewing earlier literature, Huang and his colleagues noticed that some PSCs had been considerably extra steady underneath reverse bias situations. This motivated them to research the mechanisms underpinning this higher stability, within the hope of devising an efficient methodology to stabilize perovskite cells.

Breakdown of PSCs underneath reverse bias. Credit score: Nature Power (2024). DOI: 10.1038/s41560-024-01579-7

“Degradation under reverse bias is complicated, as it varied with bias voltage, duration, perovskite quality and device stacking,” Huang defined. “In this study, we chose p-i-n structured PSCs as they have shown good operational stability from our previous studies. We used our optimized perovskite composition to minimize other possible degradation pathways.”

Huang and his colleagues utilized varied reverse bias values to PSCs, whereas altering the machine stacks. They then carefully examined what occurred within the units and tried to find out whether or not the phenomena they noticed had been correlated to the machine’s efficiency.

“By doing this, we were able to identify the degradation mechanism inside the devices,” Huang mentioned. “We carefully distinguished the degradation behavior with breakdown and gradual degradation. The former happens under high reverse bias in a short period, while the latter happens under low reverse bias in a longer duration.”

The experiments carried out by Huang and his colleagues yielded fascinating outcomes. Particularly, they unveiled a collection of electrochemical reactions that had been related to the degradation of PSCs underneath reverse bias situations.

These reactions entailed the era of iodine, which led to the corrosion of the Cu electrode within the cells. This course of, in flip, triggered the breakdown and degradation of the photo voltaic cells.

“Inspired by what we learned, we used a device stacking of lithium fluoride/tin oxide/indium tin oxide, which also makes devices stable under light and heat, to inhibit the iodine formation under reverse bias the electrode corrosion,” Huang mentioned. “By doing so, the lifetime of modified PSCs could last up to 1,000 hours under reverse bias of -1.6 V. Such a good performance really surprised me, as up to one year ago I would never have thought they could be so stable.”

The findings gathered by this staff of researchers might quickly inform the event of extra steady perovskite-based PVs, which might contribute to their future large-scale commercialization. Now that their analysis challenge is full, Huang and his colleagues hope to conduct further research, which might be geared toward delineating the higher restrict of the reverse bias stability for PSCs.

Extra data:
Nengxu Li et al, Barrier reinforcement for enhanced perovskite photo voltaic cell stability underneath reverse bias, Nature Power (2024). DOI: 10.1038/s41560-024-01579-7

© 2024 Science X Community

Quotation:
A method to reinforce the steadiness of perovskite photo voltaic cells underneath reverse bias situations (2024, July 17)
retrieved 17 July 2024
from https://techxplore.com/information/2024-07-strategy-stability-perovskite-solar-cells.html

This doc is topic to copyright. Aside from any honest dealing for the aim of personal examine or analysis, no
half could also be reproduced with out the written permission. The content material is supplied for data functions solely.

Share This Article
Leave a comment

Leave a Reply

Your email address will not be published. Required fields are marked *

Exit mobile version