Doug & Joe’s Glorious Warmth Pump Water Heater Journey (AKA DIY Set up) – CleanTechnica – Uplaza

Join day by day information updates from CleanTechnica on e mail. Or comply with us on Google Information!

---

Our pal Doug just lately purchased a warmth pump water heater and determined to save lots of amount of cash by putting in it himself. We gave him a hand with the set up and have been shocked at how comparatively simple it was. DIY warmth pump water heaters (HPWH) installations might make this recreation altering decarbonization expertise accessible for a lot of extra folks.

Warmth pump water heaters are excessive affect, but nonetheless largely under-appreciated, local weather heroes. In yearly of operation, they save 1 ton of CO2 emissions in comparison with fuel water heaters, and $400-$500 in vitality payments in comparison with electrical resistance ones. That is sufficient electrical energy financial savings to energy an electrical automobile! Better of all, the financial savings are baked in. Swap out your water heater and voila, immediately you’re a local weather champion each time you’re taking a steamy bathe.

Whereas the warmth pump water heater market has been rising at a 15-20% clip since ENERGY STAR certification in 2009, as of 2022, solely 2% of all water heater gross sales have been warmth pumps. Low market penetration means discovering a plumber to put in one could be a problem. It additionally implies that the plumbers who do set up them might increase their worth because of lack of competitors or perceived danger of an unfamiliar expertise. Set up costs are excessive in most markets within the US, with solely a few mature ones (Maine and the Northwest) the place set up prices are decrease and extra precisely mirror the true time and value.

Given this actuality, the DIY warmth pump water heater set up is a low price, viable different. DIY-ing your HPWH set up can save hundreds of {dollars} and take solely a few hours. In main HPWHs markets, just like the Northwest, as much as 53% of HPWHs are self-installed, that means a lot of people are quietly doing this already. DIY makes HPWHs extra accessible by eliminating the trouble of discovering a plumber and the at present excessive set up prices.

Be a part of Electrify Now for a free webinar in October displaying a stay DIY HPWH set up with a plumber who can reply any questions you may need. 

Doug Buys a Water Heater

Our household has proudly put in 4 HPWHs (one in our Portland home, one in an connected condominium, and two in a Cleveland duplex). For all of them, we’ve used contractors as a result of we didn’t really feel snug doing the plumbing. Nonetheless, we nonetheless needed to analysis and clarify the method in depth to all of the installers who have been unfamiliar with the expertise.

Enter our pal and neighbor, Doug, with a 12-year-old water heater (discover the age of your water heater) who noticed an excellent deal on a warmth pump: $600 for supply to your door (take a look at the various rebates obtainable nationally). Reasonably than await an emergency, Doug proactively determined to exchange his previous water heater.

He known as a pair installers and acquired a quote for $2500, which isn’t unhealthy in comparison with different stratospheric pricing we’ve seen across the nation. However Doug is semi-handy and figured he might set up himself and save a pair thousand {dollars}. He did some research, borrowed a PEX expander software, and blocked off a Sunday to do the set up. Joe joined to chronicle the journey and lend a serving to hand.

Prep Work

Doug disconnecting, draining and eradicating his previous water heater. 

First Doug needed to study a number of issues about his present water heater. As a result of there was no burner or vent coming off it, he confirmed it was electrical resistance, like half of all water heaters nationally. These are simpler to exchange as a result of they don’t require a capped fuel line or a brand new 240-volt electrical wire (although there at the moment are HPWHs that plug into an ordinary 120 volt outlet making for straightforward fuel replacements).

By means of a bit of on-line analysis (Doug’s most popular web site was Scorching Water Options), he made an inventory of the supplies and instruments he would want: 1. PEX pipe and connectors, 2. PEX reducing software, 3. Pad and drain pan for the HPWH, 4. Braided connectors for the water heater, 5. Tube for the condensate drain, 6. Condensate pump, 7. Foam pipe insulation, and eight. Pipe and water heater straps. He already had the required wrenches and he borrowed a PEX expander from a pal. The fabric for the job got here to about $150.

On set up day, Doug turned off the electrical energy to his present water heater (on the electrical panel) and shut off the water to the home (utilizing a water shutoff deal with in his basement). He then drained the water heater (lesson realized: plan for this to take a pair hours). Subsequent, he disconnected the pipes and electrical wires, and the previous, inefficient water heater was dragged to the curb to be picked up by a steel recycler.

Putting in the New Decarbonizing Water Heater

Doug laid an insulation pad and drain pan so the water heater wouldn’t relaxation on the concrete ground and danger rust from moisture. Doug and Joe then moved the brand new warmth pump water heater into place — a heavy process finest tackled by two folks!

Subsequent got here the plumbing, probably the most nerve-wracking half. Doug minimize the present PEX pipe and used the PEX expander so as to add a connector (see center image beneath). This was the primary time we’d ever performed this, however we have been amazed at how simple PEX pipe was to make use of. After including the connector Doug inserted a brand new PEX pipe, a 90 diploma elbow, and one other piece of PEX that connected to the braided water heater connector. As novice plumbers, it wasn’t very tough and went surprisingly easily.

Doug set a drain pan, expanded the PEX pipe and added an elbow and different connectors. 

Second of fact: after operating new pipes to each the cold and warm inlets, Doug turned the water again on and the water heater began to fill. There have been no leaks!

The ultimate steps have been attaching a condensate line and a pipe to the stress reduction valve (we reused the one from the previous water heater), and connecting {the electrical} wires. Doug turned on the circuit breaker on the panel, and inside a minute, his shiny new HPWH was buzzing away, fortunately making sizzling water in warmth pump solely mode (probably the most environment friendly mode of operation). Later, Doug added earthquake strapping, a small condensate pump, and insulated the pipes and braced them.

Doug linked each water strains, {the electrical} wire then turned on his HPWH.

All in, he spent about 3 hours researching, 4 hours putting in, and a pair hours on the ending touches later that week. The absolutely put in water heater appears to be like like this.

It’s now been working effectively for a number of months, and Doug even famous that the water is hotter than earlier than. Most importantly his dwelling’s electrical energy use has declined by 30%! He saves about 250 kWh a month, and $300 – $400 a yr.

This HPWH journey proved {that a} semi-handy particular person can set up a warmth pump water heater in 7-10 hours and doubtlessly save hundreds of {dollars} on set up prices. With a bit of bit of information, analysis, and a pal to assist, DIY installs can convey game-changing warmth pump water heaters inside attain of the common home-owner, serving to decarbonize our houses and lives.

Our younger apprentices helped with the set up.