Researchers use gold membrane to coax secrets and techniques out of surfaces – Uplaza

Utilizing a particular wafer-thin gold membrane, ETH researchers have made it considerably simpler to review surfaces. The membrane makes it attainable to measure properties of surfaces which might be inaccessible to standard strategies.

“Surfaces were invented by the devil”—this quote is attributed to the theoretical physicist Wolfgang Pauli, who taught at ETH Zurich for a few years and in 1945 obtained the Nobel Prize in physics for his contributions to quantum mechanics. Researchers do, certainly, battle with surfaces. On the one hand, they’re extraordinarily necessary each in animate and inanimate nature, however however, it may be devilishly troublesome to review them with standard strategies.

An interdisciplinary staff of supplies scientists and electrical engineers led by Lukas Novotny, Professor of Photonics at ETH Zurich, along with colleagues at Humboldt-Universität zu Berlin has now developed a technique that can make the characterization of surfaces significantly simpler sooner or later.

They just lately printed the outcomes of their analysis, which relies on a particularly skinny gold membrane, within the scientific journal Nature Communications.

Surfaces are necessary for performance

“Whether we are dealing with catalysts, solar cells or batteries—surfaces are always extremely relevant for their functionality,” says Roman Wyss, a former Ph.D. pupil in supplies science and first writer of the paper, who now works as a researcher on the ETH spin-off firm Enantios.

The rationale for this relevance is that necessary processes often occur at interfaces. For catalysts, these processes are the chemical reactions which might be accelerated on their floor. In batteries, the floor properties of the electrodes are essential for his or her effectivity and degradation habits.

For a few years, researchers have used Raman spectroscopy for analyzing materials properties non-destructively—that’s, with out destroying the fabric within the course of. In Raman spectroscopy, a laser beam is distributed onto the fabric, and the mirrored mild is analyzed.

From the properties of the mirrored mild, whose frequency spectrum was modified by the vibrations of the molecules within the materials, one can draw conclusions each on the chemical composition of the item into consideration—often known as its chemical fingerprint—in addition to on mechanical results akin to pressure.

Gold membrane with tiny pores

“This is a very powerful method, but it can only be applied to surfaces with strong limitations,” says Sebastian Heeg, who contributed to the experiments as a postdoc in Lukas Novotny’s group and who now leads a junior analysis group at Humboldt-Universität.

Since in Raman spectroscopy the laser mild penetrates the fabric by a number of micrometers, the frequency spectrum is affected primarily by the majority of the fabric and solely to a really small diploma by its floor, which solely contains a number of atomic layers.

To harness Raman spectroscopy additionally for surfaces, the ETH researchers developed a particular gold membrane that’s solely 20 nanometers thick and comprises elongated pores about 100 nanometers in dimension.

When such a membrane is transferred onto a floor to be investigated, two issues occur. First, the membrane prevents the laser beam from penetrating into the amount of the fabric. Second, on the places of the pores, the laser mild is concentrated and re-radiated just a few nanometers into the floor.

Thousand-fold sign amplification

“The pores act as so-called plasmonic antennas—just like the antenna in a mobile phone,” says Heeg. The antenna amplifies the Raman sign from the floor by as much as a thousand instances in comparison with the sign of standard Raman spectroscopy with out the membrane. Heeg and his colleagues have been in a position to show this on quite a lot of supplies, together with strained silicon and the perovskite crystal lanthanum nickel oxide (LaNiO₃).

Strained silicon is necessary for functions in quantum applied sciences, however to this point it has not been attainable to probe the pressure utilizing Raman spectroscopy as a result of the sign produced by the floor was coated by the background noise of the measurement.

After the gold membrane had been utilized, the pressure sign was selectively amplified to the purpose that it might be clearly distinguished from the opposite Raman alerts of the fabric.

The metallic perovskite lanthanum nickel oxide, however, is a vital materials for producing electrodes.

“The strong coupling between its crystal structure and electrical conductivity makes it possible to control the conductivity by changing the thickness of the electrode on the nanometer scale. The surface structure, one presumes, plays an essential role here,” says Mads Weber, a former postdoc at ETH Zurich and now assistant professor on the College of Le Mans, who investigates this class of supplies and was additionally concerned within the research.

Because of the brand new gold membrane technique, the researchers have been now in a position, for the primary time, to realize entry to the floor construction of lanthanum nickel oxide.

“Our approach is also interesting from the point of view of sustainability, as existing Raman equipment can gain completely new capabilities without much effort,” says Heeg.

Sooner or later, the researchers need to additional enhance their technique and adapt it to person calls for. As an example, at the moment the pores within the gold membrane have completely different sizes and are randomly oriented.

By producing a gold membrane with pores of equal dimension which might be aligned in parallel, the strategy might be optimized for particular supplies, which might enhance the energy of the Raman sign by one other issue of 100.